Openbve Central Line demo

Its all the coding for the route but no actuall route file. I've also got the ATP folder as well

The coding for the route?!
So you mean you have following txt files saved?

WHC - STR Fog.txt
Wood Lane - Liverpool Street Demo.txt
White City P3.txt
an unzipped ATP Codes folder

but not a Central Line Demo.csv?

@Ad1992 yes, I downloaded it many times to see if the CSV file would be there but it isn't for some reason.

I have sent you a pm.

Can anyone help me? I have downloaded all the files and I can't get it to work. The train is limited only up to 15 km. Please help me?

So you have downloaded all the files and you can't get it to work, but the train is only limited to 15kph? What is the problem exactly?

Ad1992 wrote:Ah an intel card....
If I remember correctly those are not the best for some games, I have an Nvidia Geforce and believe me it makes all the difference.

When you say fiddled with the settings do you mean the graphics card, or do you mean the openbve options?

Mate no nvidia for me. Family pc crashed Co's of display driver nvlddmkm.sys

Ad1992, I am very impressed. You did a good job. The only problems I've noticed is that sometimes the target speed doesn't match up with the actual line speed and I get a message saying I'm exceeding the speed limit. Same thing when running in ATO. And I've also noticed error messages saying that some files are missing from the train. I believe that they were just exterior files though.

Strange. The target speed looks fine to me, and I have never had a message about exceeding the speed limit.

The error messages I believe are due to the way the plugin is set up... Either way we will look in to resolving that in the full release version of the 1992.

On the other hand it also sounds like the plugin isn't working properly.

Ad1992 wrote:Strange. The target speed looks fine to me, and I have never had a message about exceeding the speed limit.

The error messages I believe are due to the way the plugin is set up... Either way we will look in to resolving that in the full release version of the 1992.

To clarify what i meant. The ATO always tries to match the train speed with the target speed. At some places, when it's matching the target speed, a message pops up saying that the speed limit is being exceeded. Same thing when using the coded manual as well. I'll see what areas it usually happens

Ok please do.

Ad1992, This is fantastic so far, well done!  Thank you for releasing this demo as a little taster. 
Quick question, I have the demo running fine (albeit slow due to my intel graphics but that's my problem)  but can you tell me if the target speed is meant to go up and down like the real thing?  At the moment the target speed shown to me is always at 100kph and never changes.

Thanks for your help

Yes it is. The target speed should not be showing 100 at all! You have not installed something properly.

Dennisra2001 wrote:Can anyone help me? I have downloaded all the files and I can't get it to work. The train is limited only up to 15 km. Please help me?

Dennisra2001 please PM me your email address. I will send you fixed route and instructions.

cheesedude432 wrote:

Dennisra2001 wrote:Can anyone help me? I have downloaded all the files and I can't get it to work. The train is limited only up to 15 km. Please help me?

Dennisra2001 please PM me your email address. I will send you fixed route and instructions.

With all credits included!

Ok from on if there is anyone failing to install this properly refer to to this: https://bveworldwide.forumotion.com/t1002-for-those-of-you-having-problems-with-installing-the-central-line-demo

cheesedude432 wrote:

Dennisra2001 wrote:Can anyone help me? I have downloaded all the files and I can't get it to work. The train is limited only up to 15 km. Please help me?

Dennisra2001 please PM me your email address. I will send you fixed route and instructions.

denniscani@hotmail.co.uk

Dennisra2001 wrote:

cheesedude432 wrote:

Dennisra2001 wrote:Can anyone help me? I have downloaded all the files and I can't get it to work. The train is limited only up to 15 km. Please help me?

Dennisra2001 please PM me your email address. I will send you fixed route and instructions.

denniscani@hotmail.co.uk

Hello, I have emailed you the route. It was really hard because of gmail's rubbish system. Halfway through upload my laptop froze. I doubt it will have got to you, so you can see the post AD1992 has put up.

cheesedude432 wrote:

Dennisra2001 wrote:

cheesedude432 wrote:

Dennisra2001 wrote:Can anyone help me? I have downloaded all the files and I can't get it to work. The train is limited only up to 15 km. Please help me?

Dennisra2001 please PM me your email address. I will send you fixed route and instructions.

denniscani@hotmail.co.uk

Hello, I have emailed you the route. It was really hard because of gmail's rubbish system. Halfway through upload my laptop froze. I doubt it will have got to you, so you can see the post AD1992 has put up.

Thank you so much! It actually works!!!

Dennis

Dennisra2001 wrote:Can anyone help me? I have downloaded all the files and I can't get it to work. The train is limited only up to 15 km. Please help me?

I'm glad that you got the route working . However being limited to 15kph I would be thinking that you were in Restricted Manual. When you start the train and press the PgDn button, make sure you press it until you can see the Target speed show on the speedometer.

Dennisra2001 wrote:

cheesedude432 wrote:

Dennisra2001 wrote:

cheesedude432 wrote:

Dennisra2001 wrote:Can anyone help me? I have downloaded all the files and I can't get it to work. The train is limited only up to 15 km. Please help me?

Dennisra2001 please PM me your email address. I will send you fixed route and instructions.

denniscani@hotmail.co.uk

Hello, I have emailed you the route. It was really hard because of gmail's rubbish system. Halfway through upload my laptop froze. I doubt it will have got to you, so you can see the post AD1992 has put up.

Thank you so much! It actually works!!!

Dennis

Well, Thank you so much! It's great isnt it? Have a great drive!!!

Hello,
It's really weird. I tried the ATO, Coded Manual and they both work. But 2 days later i use exact same controls and it doesnt move at all.
???   
Anyway very good work AD1992. YOU RULE!!!

        
I I am very sad. I tried an upgrade to openbve 1.4.3, and the whole thing deleted. Then I found out the official site had shutdown. I was scared out of my wits, and after half an hour of searching the internet I found an installer. After 2 hours of copying LegacyContent, I tried loads of routes. Crisp sound, fops of 50 every time, including your demo. Then I tried the C_Stock_v3. It failed. Full download, all files are there. But the announcements don't work and the exterior is crapped. Really. Flashing textures, massive holes in pictures, I tried all settings but nothing worked. Any help???!?!!!!?!!?      

Absolutely excellent!!

Thoroughly enjoyed an ATO run to Liverpool St (followed by a CM run to the siding). The stations are something else, especially approaching Bank with the lights under the platform. 
I must admit I had no time to actually look at the train itself, I was too busy having fun viewing the run from the cab!

I've travelled on the 1992 stock for a long time, I must say reading through the manual I've learnt more about the train. I always find it fun sitting in the front coach, as you thunder into a station, to me it looks like you won't stop but it certainly does, and you can feel the brake force when you stomach lands into the seat next to you (same when pulling away)  

I did like the approach to Liverpool Street, just touching the start of the platform, and the train starting motoring through the station, I was like bloody heck, stop! Halfway up the platform the train stopped on a sixpence. I always underestimate the brakes, still had my hand on '1' in case lol!

The tunnels are extremely realistic, mainly dark with the glow of the stations ahead. And the sidings at Liverpool Street were superb too. 


Score 20/10.

P.S I know it's free, but do you accept donations? If so, please do PM me for details, I personally would like to make a donation just for the sheer amount of work gone into it.


James.