Victoria LIne v4 for Openbve
2 posters
Page 1 of 1
Victoria LIne v4 for Openbve
Has any user of the above underground route managed to find a Driver Guide? As a newbie to openbve I am having great difficulty using the route, which renders in virtual darkness. There must be a way of shedding some light onto the cab controls!
johng42
johng42
Last edited by Northern Line on Mon Mar 25, 2013 12:03 pm; edited 1 time in total (Reason for editing : Case Closed ;))
johng42- Posts : 12
Join date : 2013-03-20
Re: Victoria LIne v4 for Openbve
Well for LU cab controls when you start the route:
Z = Power
A = Neutral (No power or braking applied/Coasting)
Q = Brake
F = Reverser Forward Position
N = Off Position
B = Reverser in the Reverse Position (To go backwards)
Right when you start the route and spawned at the station, Put the reverser into the forward position, then close the doors (F6). Once the doors are closed, Press the Z key to take it out of Brake and into Power notch 3. The train should start moving.
To slow the train down, press Q to put it into the brake notch and adjust accordingly.
For the problem if the dark nothingness tunnel, check that the victiria line v4 folder is in the objects folder. It will mot work without this format. check the portal for info.
Z = Power
A = Neutral (No power or braking applied/Coasting)
Q = Brake
F = Reverser Forward Position
N = Off Position
B = Reverser in the Reverse Position (To go backwards)
Right when you start the route and spawned at the station, Put the reverser into the forward position, then close the doors (F6). Once the doors are closed, Press the Z key to take it out of Brake and into Power notch 3. The train should start moving.
To slow the train down, press Q to put it into the brake notch and adjust accordingly.
For the problem if the dark nothingness tunnel, check that the victiria line v4 folder is in the objects folder. It will mot work without this format. check the portal for info.
Northern Line- Posts : 329
Join date : 2011-07-12
Age : 31
Location : London, UK
Re: Victoria LIne v4 for Openbve
Thanks Northern Line. My problem is that the cab is in darkness and I cannot see speed gauge or the platform stop indicator. I am running openbve on Linux Ubuntu 12.10 and the route runs perfectly well except for the cab lights. Any advice would be welcome
Johng42
Johng42
johng42- Posts : 12
Join date : 2013-03-20
Re: Victoria LIne v4 for Openbve
Im afraid I'm not running linux to solve this problem, but I do hope that anyone who has had this problem could help
Northern Line- Posts : 329
Join date : 2011-07-12
Age : 31
Location : London, UK
Re: Victoria LIne v4 for Openbve
Solved! I need to use the 2d cab. Now dials are visible. Thanks
johng
johng
johng42- Posts : 12
Join date : 2013-03-20
Northern Line- Posts : 329
Join date : 2011-07-12
Age : 31
Location : London, UK
Similar topics
» BVE Victoria Line
» Victoria line is available
» Victoria line V5 [WIP]
» Revamp of the Victoria Line
» Victoria Line 2009 stock announcement
» Victoria line is available
» Victoria line V5 [WIP]
» Revamp of the Victoria Line
» Victoria Line 2009 stock announcement
Page 1 of 1
Permissions in this forum:
You cannot reply to topics in this forum
|
|