Central Line Openbve Technical Problems
+6
vpodhola
stevewool
jack123
tof63
jckhinks
Northern Line
10 posters
Page 1 of 2
Page 1 of 2 • 1, 2
Central Line Openbve Technical Problems
This topic is for any problems or queries you may have in regards to the Central Line that has been released recently, Please post them here. The developer will get back to you as soon as he can.
Thanks!
Thanks!
Northern Line- Posts : 329
Join date : 2011-07-12
Age : 31
Location : London, UK
central line
hi, when i get to st pauls i get an error saying pariter not valid, also theres an error that overcast-ealing_whitecity.txt cant be found. any ideas please other than that what iv'e seen is brilliant.regards jack
jckhinks- Posts : 172
Join date : 2012-08-22
Age : 74
Location : maltby
Re: Central Line Openbve Technical Problems
The parameter not valid occurs if you haven't set up your openbve options properly.
I did say in the manual what to do about that.
As for the overcast missing file, I must have forgotten to add that. I will rectify it.
I did say in the manual what to do about that.
As for the overcast missing file, I must have forgotten to add that. I will rectify it.
Re: Central Line Openbve Technical Problems
To work properly, the route file "Ealing Broadway - Liverpool Street central line.csv", downloaded 5 minutes ago, needs:
3 objects and 6 additional textures from Network West Midlands route (files missing in the objects folders).
They are:
NWM_Open\engineeringwork\NR Transit.csv
NWM_Open\sdg\mercclksi.csv
NWM_Open\sdg\mercclksi_r.csv
NWM_Open\DAH\Gantries\Mk3_Mast2_3D.png
NWM_Open\DAH\Gantries\id_plate_2.png
NWM_Open\DAH\Gantries\Mk3_Mast_Label_2.png
NWM_Open\DAH\Gantries\Mk3_Mast_Label_1.png
NWM_Open\DAH\Gantries\Concrete1.png
NWM_Open\DAH\Gantries\Concrete1.png
However, great work!
3 objects and 6 additional textures from Network West Midlands route (files missing in the objects folders).
They are:
NWM_Open\engineeringwork\NR Transit.csv
NWM_Open\sdg\mercclksi.csv
NWM_Open\sdg\mercclksi_r.csv
NWM_Open\DAH\Gantries\Mk3_Mast2_3D.png
NWM_Open\DAH\Gantries\id_plate_2.png
NWM_Open\DAH\Gantries\Mk3_Mast_Label_2.png
NWM_Open\DAH\Gantries\Mk3_Mast_Label_1.png
NWM_Open\DAH\Gantries\Concrete1.png
NWM_Open\DAH\Gantries\Concrete1.png
However, great work!
Re: Central Line Openbve Technical Problems
Thanks for that. It seems I had one object hidden somewhere that was linking to the folder.
I have now rectified that.
I have now rectified that.
Re: Central Line Openbve Technical Problems
If anyone else has downloaded it and found the same errors, please re-download it again.
I'm sorry about this. As I, my co author, and my tester already had nwm installed, these errors have only just been found out.
I'm sorry about this. As I, my co author, and my tester already had nwm installed, these errors have only just been found out.
central line
hi downloaded the files again but I still get parameter not valid, everything is in the right folders. heeeelp. jack
jckhinks- Posts : 172
Join date : 2012-08-22
Age : 74
Location : maltby
Re: Central Line Openbve Technical Problems
Ad1992 wrote:The parameter not valid occurs if you haven't set up your openbve options properly.
I did say in the manual what to do about that.
Re: Central Line Openbve Technical Problems
Can I just ask anyone that has downloaded this to redownload the object folder. I uploaded more than I needed to and i've now trimmed the file size.
Re: Central Line Openbve Technical Problems
Last edited by jack123 on Fri Nov 14, 2014 10:35 pm; edited 1 time in total
jack123- Posts : 40
Join date : 2012-12-05
Age : 27
Re: Central Line Openbve Technical Problems
It is advisable to be running it in at least 1.4.3, as for the freezing I think the problem is down to the interpolation settings as I said in the manual.
Try changing those and it should solve the problem.
I'm glad you are enjoying it.
Try changing those and it should solve the problem.
I'm glad you are enjoying it.
central line
hi,well iv'e tried every setting for this route and i still get parameter not valid, i am running openbve 1.4.3. on windows 7. i really like this route but if i can only run it in stages then i am going to have uninstall it sorry. jack
jckhinks- Posts : 172
Join date : 2012-08-22
Age : 74
Location : maltby
Re: Central Line Openbve Technical Problems
I'm afraid i'm not sure what is causing that. My tester had the same problem until he installed 1.4.3 and changed the interpolation settings.
If this doesn't work on yours i'm unsure what to suggest.
If this doesn't work on yours i'm unsure what to suggest.
central line
hi Ad1992, thanks anyway regards jack
jckhinks- Posts : 172
Join date : 2012-08-22
Age : 74
Location : maltby
Re: Central Line Openbve Technical Problems
Hi, Downloaded all files, and placed in the correct folders respectively, however whenever i load the route none of the objects are picked up and the screen is grey. Any ideas?
Cheers
Stevewool
Cheers
Stevewool
stevewool- Posts : 19
Join date : 2014-07-08
Central Line stock 1992 lights
I have found that the front of the train 1992 has red lights and the end of the train white lights. I am not sure but I think that it could be a mistake. Nevertheless the route and train is perfect! Hi! Podhola
vpodhola- Posts : 39
Join date : 2011-10-30
Age : 81
Location : Hradec Kralove, Czech Republic
Re: Central Line Openbve Technical Problems
What should happen is that when you turn the train on, the lights will change from red to white. It is like that in real life too.
Re: Central Line Openbve Technical Problems
If all objects were placed in the right place you shouldn't have any errors.
Aside from the installation instructions have you bothered to read the manual?
Aside from the installation instructions have you bothered to read the manual?
Re: Central Line Openbve Technical Problems
For the sake that we don't run into too many topics relating to the same route please keep relative technical questions in the Central Line Techincal Problems topic. The developer does regularly check so your post will not be missed.
Thanks.
Moved
Thanks.
Moved
Northern Line- Posts : 329
Join date : 2011-07-12
Age : 31
Location : London, UK
Re: Central Line Openbve Technical Problems
Yes, I've read the manual. I have an adequate amount of RAM and my anti-virus hasn't removed any of the files at all (this was the first thing I did before asking the question as I didn't want to waste your time), no matter, i'll figure it out. Its obviously an issue at my end.
Thanks anyway,
Steve
Thanks anyway,
Steve
Last edited by Northern Line on Tue Nov 18, 2014 7:57 pm; edited 1 time in total (Reason for editing : Corrected Spelling & Punctuation (Try to look over what you type so it's clear for everyone else))
stevewool- Posts : 19
Join date : 2014-07-08
Re: Central Line Openbve Technical Problems
Forgive me, it's just a lot of people don't seem to do so.
Perhaps you could try changing some of the options not just my suggested interpolation.
Perhaps you could try changing some of the options not just my suggested interpolation.
Re: Central Line Openbve Technical Problems
stevewool wrote:Hi, Downloaded all files, and placed in the correct folders respectively, however whenever i load the route none of the objects are picked up and the screen is grey. Any ideas?
Cheers
Stevewool
Hi Steve, Just to double check, is your file path the same as this? (Starting from the OpenBVE Directory)
Openbve/Railway/Object/Central Line/
If it is anything different to the above, could you screenshot your problem.
Thanks,
Northern Line- Posts : 329
Join date : 2011-07-12
Age : 31
Location : London, UK
Re: Central Line Openbve Technical Problems
Ah yes good point. The file directory has now changed which is why I said it is a good idea to delete the older version.
Page 1 of 2 • 1, 2
Similar topics
» Openbve Central Line demo Technical problems and or route questions
» For those of you having problems with installing the Central Line demo
» BVE Central Line
» Central Line using a Mac
» Openbve 1992 stock and central line route
» For those of you having problems with installing the Central Line demo
» BVE Central Line
» Central Line using a Mac
» Openbve 1992 stock and central line route
Page 1 of 2
Permissions in this forum:
You cannot reply to topics in this forum
|
|