Manuel High Speed Trains

The new train of italians, its my next train, here an screnshoots and a video of this beautifull high speed train.

Bombardier Zefiro, ETR 1000, the next replace of the ETR500

It is looking very well, Manuel, I would probably apply normals for the lower front part... ?

Dexter wrote:It is looking very well, Manuel, I would probably apply normals for the lower front part... ?

You can the only exception is "DON'T CREATE RESKINS" That is my second work too.

The csv code it's written on manual method, so, that could be a bit hard to work on it.

This isn't a request to create a custom version, but a tip by Dexter, what you, Manuel, can do better The downside of the nose is darker than the downside of the rest of the carriage; that's an issue with your normals.

Quork wrote:This isn't a request to create a custom version, but a tip by Dexter, what you, Manuel, can do better The downside of the nose is darker than the downside of the rest of the carriage; that's an issue with your normals.

That part on texture is a bit dark, i fix it.

The train is ready for download, but there are issues with Speedometer Needle.

http://hstopenbve.blogspot.com/p/blog-page.html

Thank you, Manuel. Shall we add your website into WorldWide links? I might give the train a stest drive today. What exactly is the issue? Maybe we can figure it out...

Manuel18 wrote:The train is ready for download

Manuel, you are a record man: we can run your Etr 1000 using OpenBVE before real passengers could travel by the real one!

Congratulations!

tof63 wrote:

Manuel18 wrote:The train is ready for download

Manuel, you are a record man: we can run your Etr 1000 using OpenBVE before real passengers could travel by the real one!

Congratulations!

Thanks a lot, and tell at your friend "fas" on italian trainsim forum i very apreciate his message and not is easy find images about cabview. However i know some buttons are missing, but when the real train is ready and i see a video how he drive the train, i will be updated it.

My mission is clear, i want revolution this freeware train simulator on high speed train world sense!

Take another directions, i had experience modeling on trainz and msts, but i know for those simulators exist limitations.

i work on Microsoft Train Simulator AGV Alstom Cabview is a payware train for that simulator but what a 2D Cab ?

When i start BVE 2.0 i play on London Underground routes i update it at BVE 4.0 and until now Openbve i recently was on Venezuela Virtual Railway Project, but create routes is a hard work , i start reading how to create a code on Manual Method and create a Venezuelan Alsthom Metropolitan Train It was soo simple that model is fully modeled with interior 3D Cab Animated Doors a great train but i want go beyond!, when i run the LGV_Route created by BVEFrance , i dislike his train "on exterior" but it has a good train system "dll", i think on create my favourite train "TGV - Eurostar" a 20 cars french trainset and most long high speed train "SINGLE Couple" in Europe" , my venezuelan friend like the Italian Trains too but i'm more a bit of french likes, specially the ETR460 Pendolino, and he show me the ETR1000 a Beautiful italian train , obviously we joke and say "Hey look the new italian train looks like a New Ferrari" , to end , thanks at all to appreciate my work.

Manuel Mejias.

I edit my first post and title has been changed to evit spam, creating thread for any train is spam, i decide post any trains right here.

TGV Duplex is ready to download at my blog. http://hstopenbve.blogspot.com/

TGV Duplex





TGV POS V150 Record "4402"

TGV Réseau wagons with the TGV POS 4401!

Manuel, do you have any banner for your site? I could add it in our links here...

Dexter wrote:Manuel, do you have any banner for your site? I could add it in our links here...

Use This one.




TGV Thalys and TGV POS 4401 coaches Reseau Available!

http://hstopenbve.blogspot.com/

Taking back from scene with this Shinkansen 500 Nozomi TRAIN!, this doesnt had 3D Cab, i've decide a 2D cab for more realistic details.

http://hstopenbve.blogspot.com/p/shinkansen.html

Finally a new Shinkansen! And this one is my favourite.

Thanks, here are the Shinkansen Series 700, and Soon the ICE 3



Inter City Express BR403 ICE 3

Oh... Seems I can scrap my model then?^^

If you want, you can send me the file for cross-checking. Without wanting to boast around, you probably won't find a better 403/406-specialist in the BVE-scene

Also I can provide you with high-detail images and exact information about the cabin. I was planning to create a 3D panel sometime (though very low priorised ATM, the route reverser is much more important, the external came second but seems to be pointless now, and the brake calculations third (now second)).

Are you planning to create the multi-system ICE3 (class 406) as well? 406 x0x with ATBL and ETCS for use in Germany, Belgium and the Netherlands (normally for Frankfurt-Bruxelles), 406 x5x with ATBL for use in Germany, the Netherlands and Belgium without high speed routes (normally for Frankfurt-Amsterdam), 406 x8x with KVB, TVM and ATBL for use in Germany, France, Belgium withoug high speed routes and the Netherlands (normally for Frankfurt-Paris). And all with PZB/LZB, of course.

ATBL is a system integrating the belgish TBL/TBL+ and the netherlandish ATB train protection systems.

Quork wrote:Oh... Seems I can scrap my model then?^^

If you want, you can send me the file for cross-checking. Without wanting to boast around, you probably won't find a better 403/406-specialist in the BVE-scene

Also I can provide you with high-detail images and exact information about the cabin. I was planning to create a 3D panel sometime (though very low priorised ATM, the route reverser is much more important, the external came second but seems to be pointless now, and the brake calculations third (now second)).

Are you planning to create the multi-system ICE3 (class 406) as well? 406 x0x with ATBL and ETCS for use in Germany, Belgium and the Netherlands (normally for Frankfurt-Bruxelles), 406 x5x with ATBL for use in Germany, the Netherlands and Belgium without high speed routes (normally for Frankfurt-Amsterdam), 406 x8x with KVB, TVM and ATBL for use in Germany, France, Belgium withoug high speed routes and the Netherlands (normally for Frankfurt-Paris). And all with PZB/LZB, of course.

ATBL is a system integrating the belgish TBL/TBL+ and the netherlandish ATB train protection systems.

 I'm not going to create 3D Cab for trains for a long moment, the multi system its hard to me, i dont know how to create the dll files

The dlls are a big topic of course, I wasn't meaning that though; I was relating to the external, as already that is distinguishable. The 406 have 'some' pantographs more

The 700 looks good! I just tried out the 500 Nozomi, and the externals are brilliant - they don't seem to have the transparency issues the TGV and the ATR do - but the cabin could have used some touching-up around the windscreen, along with the windscreen wipers.

But brilliant work! I'll give it a bash on Kodama at some point - although it would if you could get in touch with the developers of Kodama and see if they wanted to use your externals as passing trains objects as well - because Kodama looks eerily quiet for a Shinkansen route atm!

i have to ask, looking at your .b3d files etc, there seems to be some form of modeller used, not just hand coding? so in the nicest way possible, you seem to be able to use a form of modeller and get it to give amazing results, are you planning on giving the tips away?

Personally, I would call it some excellent configuring of object type trains.

It's way beyond what I can do with those nose area's.

Oddly, the latest ones seem to have the links recently changed above.

Might be due to English being a foreign language to me, but... erm... Steve I'm not sure (to not say I don't have a clue) what you're saying? 

mrknowitall wrote:i have to ask, looking at your .b3d files etc, there seems to be some form of modeller used, not just hand coding? so in the nicest way possible, you seem to be able to use a form of modeller and get it to give amazing results, are you planning on giving the tips away?

No more suffering hand code!

If you dont had experience with Blender like me this is my masterplan .

3DS MAX > "EXPORT TO .3ds" > Milkshape 3D "Fix the issues with textures on 3ds max" > "Export Again .3ds" > Blender "export .b3d" .


However the Script for blender its  right here.

Must use Blender 2.46 "DONT USE LATER VERSIONS!".

http://koti.welho.com/tuusaare/BVE-Blender_import-export.zip

installed at

C:\Documents and Settings\USERNAME\Aplication Data\Blender Foundation\Blender\.blender\scripts

Quork wrote:The dlls are a big topic of course, I wasn't meaning that though; I was relating to the external, as already that is distinguishable. The 406 have 'some' pantographs more

Thaks for the info, now. lets Check the "ZugSet!"

BR403  ( Cab car + Pantograph car + Car + Bar + Car + Car + Pantograph car +  Cab Car )

BR406 ( CabCar + Pantograph Car + Pantograph Car + Car + Car + Pantograph Car + Pantograph Car + Cab Car )

Where is the BoarbistroCar in the ICE3M BR406 ?