BVE WorldWide
Would you like to react to this message? Create an account in a few clicks or log in to continue.

Welsh Branch progress update

+5
nigelb
Stevegr
fas
Stephen Cross
graymac
9 posters

Go down

Welsh Branch progress update - Page 2 Empty Re: Welsh Branch progress update

Post by leezer3 Thu Jun 19, 2014 12:01 am

Irfanview PNGOUT isn't bad and neither is Photoshop, but it won't get you nearly as small as you can go.

Try this for size:
http://pnggauntlet.com/

Whilst it'll take a long time to run, you'll save somewhere in the region of 30% total.
Depending on the file you may get as much as 90% size reduction, down to somewhere about a 5% reduction for something that's been through Irfanview.

(On a test run on the Cwm Typsn veichles folder, I'm just over 50% of the way through after 20 mins on a reasonable speed quad core and have saved 5.5mb so far. I'd guess on a total 8-10mb total saving)

Cheeers

Chris Lees

http://www.bvecornwall.co.uk

leezer3

Posts : 1960
Join date : 2011-08-23

http://www.bvecornwall.co.uk

Back to top Go down

Welsh Branch progress update - Page 2 Empty Re: Welsh Branch progress update

Post by Dexter Thu Jun 19, 2014 12:05 am

I might as well try that... I still have the original files. It does convert png's to 8-bit as well, right? It might run quite well on i5 and on Phenom II x4...

EDIT: Whole folder (about 40 pics) done in 1min 7secs on i5. Average size reduction is about 10%...
Dexter
Dexter

Posts : 2153
Join date : 2011-07-08
Age : 38
Location : Brno, Czech republic

http://www.brnobve.eu

Back to top Go down

Welsh Branch progress update - Page 2 Empty Re: Welsh Branch progress update

Post by leezer3 Thu Jun 19, 2014 12:27 am

Dexter wrote:
I might as well try that... I still have the original files. It does convert png's to 8-bit as well, right? It might run quite well on i5 and on Phenom II x4...

No 8-bit, it just applies multiple PNG compressions in sequence.
You'll get less of a drop on 8 bit files, but should still be around the 5% mark I'd think.

Final result on the Cwm Typsn vehicles folder:
12793.25kb saved, in 38:40 mins

Cheers

Chris Lees

http://www.bvecornwall.co.uk

leezer3

Posts : 1960
Join date : 2011-08-23

http://www.bvecornwall.co.uk

Back to top Go down

Welsh Branch progress update - Page 2 Empty Re: Welsh Branch progress update

Post by Dexter Thu Jun 19, 2014 12:34 am

Yeah, obviously, as the 8-bit textures are not as big as 24-bit ones. :-)
Dexter
Dexter

Posts : 2153
Join date : 2011-07-08
Age : 38
Location : Brno, Czech republic

http://www.brnobve.eu

Back to top Go down

Welsh Branch progress update - Page 2 Empty Re: Welsh Branch progress update

Post by Northern Line Thu Jun 19, 2014 9:46 am

I know some parts of welsh railways use the ERTMS in cab signalling. A very lookalike to the signalling on the Eurostar
Northern Line
Northern Line

Posts : 323
Join date : 2011-07-12
Age : 30
Location : London, UK

Back to top Go down

Welsh Branch progress update - Page 2 Empty Re: Welsh Branch progress update

Post by Quork Thu Jun 19, 2014 10:47 pm

AFAIK that's only one line and acts as a lifesize laboratory for ETCS (ERTMS).
Quork
Quork

Posts : 1437
Join date : 2012-05-05
Age : 32
Location : Hofheim a.T., Hessen (Hesse), European Union

Back to top Go down

Welsh Branch progress update - Page 2 Empty Re: Welsh Branch progress update

Post by Sponsored content


Sponsored content


Back to top Go down

Back to top

- Similar topics

 
Permissions in this forum:
You cannot reply to topics in this forum