How do I remove EMB without the beep?
3 posters
Page 1 of 1
How do I remove EMB without the beep?
Hello
When I have started the program and I get "191 errors" and "5 warnings"
written in red in the upper left corner of the screen.
At the far right in the left corner, EMB is highlighted in red.
If after the brakes are closed, the brake moves to B3, it starts beeping, beep, beep beep,
and so on.
The train can run, but I can't start without it beeping.
?How do I remove EMB without the beep?
OpenBVE v1.7.1.5
Gubben i Kalmar- Posts : 8
Join date : 2020-04-24
Location : Kalmar Sweden
Re: How do I remove EMB without the beep?
The errors and warnings are probably 'normal'
The beeping is because one of the safety systems in the train hasn't been set correctly.
How to do this depends on exactly which train- Link please
The beeping is because one of the safety systems in the train hasn't been set correctly.
How to do this depends on exactly which train- Link please
Re: How do I remove EMB without the beep?
Thank you leezer3 for responding quickly.
Don't know if the image below will help you.
But it is the standard train and route
at the download.
Hope you can find a solution to my problem
because it is fun to run trains.
Class 323 EMU
Max speed: 90 mph (145 km/h)
In service: 1992-
Manufacturer: Hunslet TPL
Number built: 43
Formation: 3 car
Power output: 1.168 MW
Voltage: 25 kV AC Overhead
Braking system: Regenerative Air Brake
trainsimcentral.co.uk
railsimroutes.co.uk
Don't know if the image below will help you.
But it is the standard train and route
at the download.
Hope you can find a solution to my problem
because it is fun to run trains.
Class 323 EMU
Max speed: 90 mph (145 km/h)
In service: 1992-
Manufacturer: Hunslet TPL
Number built: 43
Formation: 3 car
Power output: 1.168 MW
Voltage: 25 kV AC Overhead
Braking system: Regenerative Air Brake
trainsimcentral.co.uk
railsimroutes.co.uk
Gubben i Kalmar- Posts : 8
Join date : 2020-04-24
Location : Kalmar Sweden
Re: How do I remove EMB without the beep?
If you open the Class 323's folder, you should find a HTML file entitled Cl323.drivers-guide.htm
This contains the full set of instructions.
I think you probably want to run through the startup sequence before moving off (This assumes default controls)
Reverser to F (F)
Reverser to N (V)
Reset AWS self-test (Insert)
Reverser to F (F)
The beeping may also be being caused by the Driver Supervision Device.
If a key is not pressed once every 7 seconds, this automatically applies EB. When the beeping starts from this, press Delete to reset it.
This contains the full set of instructions.
I think you probably want to run through the startup sequence before moving off (This assumes default controls)
Reverser to F (F)
Reverser to N (V)
Reset AWS self-test (Insert)
Reverser to F (F)
The beeping may also be being caused by the Driver Supervision Device.
If a key is not pressed once every 7 seconds, this automatically applies EB. When the beeping starts from this, press Delete to reset it.
Gubben i Kalmar likes this post
Re: How do I remove EMB without the beep?
have Googled and read some manuals.
And I've searched
/ Usr / share / games / BVE / Train / BR_Class_323
but don't find "Cl323.drivers-guide.htm".
But with Your instruction I got quiet on the beep.
And the train came off as I wish.
Gooled at "Cl323.drivers-guide.htm" and got up
an instruction. a version No: 4, on the web.
Don't know if it applies.
Thank you very much for your help. Are you a beginner in
Corona times, it's good to have an experienced guy
to lean against.
Thanks for taking the time.
Gubben i Kalmar- Posts : 8
Join date : 2020-04-24
Location : Kalmar Sweden
Re: How do I remove EMB without the beep?
- Code:
/ Usr / share / games / BVE / Train / BR_Class_323
That's the problem. You have to use the "Cl323_Unrefurb_openbve" folder named version of the train, which is available on Anthony Bowden's website.
Page 1 of 1
Permissions in this forum:
You cannot reply to topics in this forum
|
|