Doors open but not closed?
3 posters
Page 1 of 1
Doors open but not closed?
by jack123 Mon Jun 03, 2013 9:24 pm
Hi guys,
I'm trying to modify a older version of a B92 stock DLR unit. On the DLR the train opens its doors itself and then the train captain or PSA closes them. I was thinking, is there anyway openbve can do this? So that the doors automatically open, and the user is responsible for closing them? Maybe chaging a device number?
Thanks
I'm trying to modify a older version of a B92 stock DLR unit. On the DLR the train opens its doors itself and then the train captain or PSA closes them. I was thinking, is there anyway openbve can do this? So that the doors automatically open, and the user is responsible for closing them? Maybe chaging a device number?
Thanks
jack123- Posts : 40
Join date : 2012-12-05
Age : 27
Re: Doors open but not closed?
by Dexter Mon Jun 03, 2013 9:53 pm
Hello Jack,
I think what you need to look into is the "door mode" in the train.dat file. There is a value that specifies the way the door are working. If I am not mistaking there are three modes: "manual", "semi-automatic" and "automatic". Somebody correct me if I am wrong, please.
I think what you need to look into is the "door mode" in the train.dat file. There is a value that specifies the way the door are working. If I am not mistaking there are three modes: "manual", "semi-automatic" and "automatic". Somebody correct me if I am wrong, please.
Dexter- Posts : 2153
Join date : 2011-07-08
Age : 38
Location : Brno, Czech republic -
Re: Doors open but not closed?
by theflyingoreo Tue Jun 04, 2013 2:29 am
Go to your train.dat file. It should look like this (using my train.dat as an example)
#DEVICE
0 ; Ats
0 ; Atc
0 ; Eb
0 ; ConstSpeed
0 ; HoldBrake
0 ; ReAdhesionDevice
0 ; LoadCompensatingDevice (not used)
0 ; PassAlarm
0 ; DoorOpenMode
0 ; DoorCloseMode
What concerns you are the last 2 values. Change the 2nd last value to 1, this allows the doors to open by itself but you have no control over them and the last value to 2 which allows only manual control over closing the doors.
#DEVICE
0 ; Ats
0 ; Atc
0 ; Eb
0 ; ConstSpeed
0 ; HoldBrake
0 ; ReAdhesionDevice
0 ; LoadCompensatingDevice (not used)
0 ; PassAlarm
0 ; DoorOpenMode
0 ; DoorCloseMode
What concerns you are the last 2 values. Change the 2nd last value to 1, this allows the doors to open by itself but you have no control over them and the last value to 2 which allows only manual control over closing the doors.
theflyingoreo- Posts : 116
Join date : 2011-07-09
Location : Sydney Australia -
jack123- Posts : 40
Join date : 2012-12-05
Age : 27
Similar topics» any way to only allow doors to open if its an accurate stop
» Even though the AI train hasn't stop completely, the AI train is open the doors.
» Animating Folding Doors
» Bve4Trains closed down?
» Doors
» Even though the AI train hasn't stop completely, the AI train is open the doors.
» Animating Folding Doors
» Bve4Trains closed down?
» Doors
Page 1 of 1
Permissions in this forum:
You cannot reply to topics in this forum|
|
|