BVE WorldWide
Would you like to react to this message? Create an account in a few clicks or log in to continue.

Running using AI...

5 posters

Go down

Running using AI... Empty Running using AI...

Post by CaptED Sat Sep 01, 2012 7:51 pm

Hi Gang...

As a Newbie ... I was taking "Gray's" suggestion about running a Route using the AI....

Which I first took a Picture of the Timetable and printed it ...

As you know from other post I have been setting up Axis for things like Throttle & Brakes....

Here is what I found out ... AI only runs when all controls are set to Keyboard... and Will not work with
having a Joystick Axis set....

First I exported the controller setup.. with axis setup...
So to fix this I had to set every thing back to Keyboard... and then exported it as "Orginal Settings"...

Now to use AI, I simply import the Keyboard settings ... and let it rip....
then when I want to run it without the AI I simply import the other settings...

Keep in mind I am a newbie and there may be away around this issue....

Ed

CaptED
CaptED

Posts : 75
Join date : 2012-08-19
Age : 79
Location : Bryant, Arkansas

Back to top Go down

Running using AI... Empty Re: Running using AI...

Post by Drag0nflamez Sat Sep 01, 2012 10:03 pm

Guess this counts as a bug report...

Drag0nflamez

Posts : 210
Join date : 2012-05-11
Location : The Netherlands

Back to top Go down

Running using AI... Empty Re: Running using AI...

Post by alvinhochun Thu Sep 06, 2012 11:30 am

Just unplug your joystick and you should be fine.

P.S. this bug has existed since the implementation of Joystick support and AI...
alvinhochun
alvinhochun

Posts : 88
Join date : 2012-05-08
Location : Hong Kong

Back to top Go down

Running using AI... Empty Re: Running using AI...

Post by tonytrainsfree1 Sat Sep 08, 2012 4:24 pm

dose any one know wart is the key to use the al

tonytrainsfree1

Posts : 43
Join date : 2012-08-30

Back to top Go down

Running using AI... Empty Re: Running using AI...

Post by graymac Sat Sep 08, 2012 5:45 pm

Ctrl+A
graymac
graymac

Posts : 2134
Join date : 2011-08-28
Location : Co Mayo, Eire

http://www.celtictrainsim.com

Back to top Go down

Running using AI... Empty Re: Running using AI...

Post by CaptED Mon Sep 10, 2012 8:33 pm

Hi alvinhochun..

Thanks for the reply... Unplugging the Joysticks (Yes more that one)
is not an option... Reason is Windows 7 reassigns Joystick numbers...
and effects the setup once reconnected....

It is actually easier to have two controller profiles one with Keyboard
and one with controllers ... This seems simple enough

Again Thanks
Ed
CaptED
CaptED

Posts : 75
Join date : 2012-08-19
Age : 79
Location : Bryant, Arkansas

Back to top Go down

Running using AI... Empty Re: Running using AI...

Post by alvinhochun Tue Sep 11, 2012 3:50 am

Perhaps you don't know, in the settings page there is an option to disable joystick.
alvinhochun
alvinhochun

Posts : 88
Join date : 2012-05-08
Location : Hong Kong

Back to top Go down

Running using AI... Empty Re: Running using AI...

Post by CaptED Tue Sep 11, 2012 2:36 pm

Hi "alvinhochun"

Thank You, Thank You... Yes I know about it but never put 2 and 2 together..
This is going to be worth a try for sure ....

Ed
CaptED
CaptED

Posts : 75
Join date : 2012-08-19
Age : 79
Location : Bryant, Arkansas

Back to top Go down

Running using AI... Empty Re: Running using AI...

Post by Sponsored content


Sponsored content


Back to top Go down

Back to top

- Similar topics

 
Permissions in this forum:
You cannot reply to topics in this forum