How to setup the pro throttle with BVE
2 posters
Page 1 of 1
How to setup the pro throttle with BVE
Just purchased the Pro Throttle for Open BVE. Not sure how to set up the throttle commands.
can you please advise.
Thank You Jim
can you please advise.
Thank You Jim
jtsako- Posts : 6
Join date : 2016-12-14
Re: How to setup the pro throttle with BVE
Hopefully it should appear as a joystick in the openBVE settings page.
If so:
1. Center all joystick axis.
2. Press the 'Add Control' button.
3. Select one of the following from the dropdown: SINGLE_FULLAXIS, POWER_FULLAXIS, BRAKE_FULLAXIS
4. Change the radio button to 'joystick'
5. Click in the joystick grab box with your mouse.
6. Move your desired axis.
You can obviously also do this with any other control, selecting a button instead
If so:
1. Center all joystick axis.
2. Press the 'Add Control' button.
3. Select one of the following from the dropdown: SINGLE_FULLAXIS, POWER_FULLAXIS, BRAKE_FULLAXIS
4. Change the radio button to 'joystick'
5. Click in the joystick grab box with your mouse.
6. Move your desired axis.
You can obviously also do this with any other control, selecting a button instead
Re: How to setup the pro throttle with BVE
lezzar3,
Thanks for your reply. Will try what your suggesting.
Jim
Thanks for your reply. Will try what your suggesting.
Jim
jtsako- Posts : 6
Join date : 2016-12-14
Similar topics
» How to setup 3D cab for class 323
» Confused about throttle in a route
» BVE Downloaded and Setup Stalling
» Train Cab /throttle Controller Purchase suggestion
» [SOLVED] How to use Saitek X52 throttle for power/brakes in OpenBVE?
» Confused about throttle in a route
» BVE Downloaded and Setup Stalling
» Train Cab /throttle Controller Purchase suggestion
» [SOLVED] How to use Saitek X52 throttle for power/brakes in OpenBVE?
Page 1 of 1
Permissions in this forum:
You cannot reply to topics in this forum
|
|