Openbve Central Line demo
+21
alexsp32
RizGE777
1996 stock stalker
Revonthus
Quork
cheesedude432
Northern Line
JLE Creator (old)
leezer3
buckysam
Greater Anglia Metro
Dexter
VishnuB
sstockfan
axlebox
cris_smith14
ecreek
hkmtrhah
jack123
Stephen Cross
Ad1992
25 posters
Page 3 of 6
Page 3 of 6 • 1, 2, 3, 4, 5, 6
Re: Openbve Central Line demo
I think I said that White city is now the only part that needs finishing.
If all goes well it should only take a week or two. This is however the final final section that needs to be finished. After this is done the route as it is for this demo is ready.
If all goes well it should only take a week or two. This is however the final final section that needs to be finished. After this is done the route as it is for this demo is ready.
Re: openbve central line demo.
sorry. Have a good day!Ad1992 wrote:I think I said that White city is now the only part that needs finishing.
If all goes well it should only take a week or two. This is however the final final section that needs to be finished. After this is done the route as it is for this demo is ready.
cheesedude432- Posts : 30
Join date : 2014-01-26
Re: Openbve Central Line demo
Right...
Because of the mess that our former member left White City in, I have decided to release the demo as it is.
White City is unfinished in terms of the platform design and trackwork. But I want to scrap most of this and just completely re do all the trackwork, so it makes more sense for me to release the demo now, and then release a fully finished White City with the first full release. It also saves me having to build White City twice!
I have a few finishing touches to add in the next few days, but I promise this demo will be available this week.
I will make an announcement again when it is ready for download.
Thank you again for your patience.
Because of the mess that our former member left White City in, I have decided to release the demo as it is.
White City is unfinished in terms of the platform design and trackwork. But I want to scrap most of this and just completely re do all the trackwork, so it makes more sense for me to release the demo now, and then release a fully finished White City with the first full release. It also saves me having to build White City twice!
I have a few finishing touches to add in the next few days, but I promise this demo will be available this week.
I will make an announcement again when it is ready for download.
Thank you again for your patience.
Re: Openbve Central Line demo
My motto: Ad1992 is a godAd1992 wrote:Right...
Because of the mess that our former member left White City in, I have decided to release the demo as it is.
White City is unfinished in terms of the platform design and trackwork. But I want to scrap most of this and just completely re do all the trackwork, so it makes more sense for me to release the demo now, and then release a fully finished White City with the first full release. It also saves me having to build White City twice!
I have a few finishing touches to add in the next few days, but I promise this demo will be available this week.
I will make an announcement again when it is ready for download.
Thank you again for your patience.
Thank you very much!!!
cheesedude432- Posts : 30
Join date : 2014-01-26
Re: Openbve Central Line demo
This does mean that White City is a WIP starting point, but I think it would be better to release what I have done and then with the next version, include a fully finished WHC.
Besides in the next version you will be able to start from Ealing Broadway which adds further length to the route.
Anyway watch this space for my release announcement.
Besides in the next version you will be able to start from Ealing Broadway which adds further length to the route.
Anyway watch this space for my release announcement.
Re: Openbve Central Line demo
BRILLIANT NEWS!!!
Ad1992 don't worry! Practically all BVE routes do start at a station what is not even finished. They tend to only have one section of station in the background. Your white city is well beyond what any normal starting station looks like anyway.
Can't wait!
Ad1992 don't worry! Practically all BVE routes do start at a station what is not even finished. They tend to only have one section of station in the background. Your white city is well beyond what any normal starting station looks like anyway.
Can't wait!
jack123- Posts : 40
Join date : 2012-12-05
Age : 26
Re: Openbve Central Line demo
Demo now available. You can find it on the website or under the verified downloads thread.
HEEEEELP!!!!!!!!
ALL I GET IS GREY WITH SIGNALS PLEASE HELP I HAVE TO PLAY THISAd1992 wrote:Demo now available. You can find it on the website or under the verified downloads thread.
1996 stock stalker- Posts : 40
Join date : 2013-07-18
Re: Openbve Central Line demo
Same as me and I can't see the exterior of the train because it's glitching and the sound cuts out once I reach 15kph
Guest- Guest
Re: Openbve Central Line demo
it would rely help if you zip the whole thing then upload it
1996 stock stalker- Posts : 40
Join date : 2013-07-18
Re: Openbve Central Line demo
Very well done Ad for producing such a piece of work, I had no problems with the route
Revonthus- Posts : 20
Join date : 2014-02-23
Re: Openbve Central Line demo
just forgot to make a Railway folder
1996 stock stalker- Posts : 40
Join date : 2013-07-18
1992TS Stuck in Restricted Manual
Hello! I have downloaded your route and have to say it is very very good, amazing work so far mate, but I have run into a problem... I cannot get the train out of Restricted Manual no matter how hard I try.
I have read the `Driving Manual.rtf` & have changed modes and pressed the correct buttons for the `ATO Start` but it is not moving. I can only drive in Restricted Manual despite changing modes. [size=12.800000190734863]The key assignments are default as the `PA` button works fine so its not a key assignment problem.[/size]
Can someone tell me what I am doing wrong? How do I know what mode I am in? maybe I could be in the wrong mode?
Thanks
I have read the `Driving Manual.rtf` & have changed modes and pressed the correct buttons for the `ATO Start` but it is not moving. I can only drive in Restricted Manual despite changing modes. [size=12.800000190734863]The key assignments are default as the `PA` button works fine so its not a key assignment problem.[/size]
Can someone tell me what I am doing wrong? How do I know what mode I am in? maybe I could be in the wrong mode?
Thanks
RizGE777- Posts : 12
Join date : 2014-03-16
Re: Openbve Central Line demo
when you load the route do the following:RizGE777 wrote:Hello! I have downloaded your route and have to say it is very very good, amazing work so far mate, but I have run into a problem... I cannot get the train out of Restricted Manual no matter how hard I try.
I have read the `Driving Manual.rtf` & have changed modes and pressed the correct buttons for the `ATO Start` but it is not moving. I can only drive in Restricted Manual despite changing modes. The key assignments are default as the `PA` button works fine so its not a key assignment problem.
Can someone tell me what I am doing wrong? How do I know what mode I am in? maybe I could be in the wrong mode?
Thanks
if you wish to drive in CM:
press F on your keyboard to put the train in forward
press page down once to put the train in CM
about 20 sec before you depart white city you will get a target speed
if you wish to drive in ATO:
press F on your keyboard to put the train in forward
press Z 4 times to put the train in Neutral
press page down twice to put the train in ATO
close the doors and press 5 and 8 at the same time till the train starts moveing.
1996 stock stalker- Posts : 40
Join date : 2013-07-18
Re: Openbve Central Line demo
Thank You 1996 Stock Stalker for your clear instructions, it now works perfectly. I must have been doing the procedures but in the wrong mode but thanks to you I got it working.
Thanks a bunch!
Thanks a bunch!
RizGE777- Posts : 12
Join date : 2014-03-16
Re: Openbve Central Line demo
Not a problem if anyone else wants a hand getting it started im online all night tonight. i know how frustrating it is i didn't get mine working first time.RizGE777 wrote:Thank You 1996 Stock Stalker for your clear instructions, it now works perfectly. I must have been doing the procedures but in the wrong mode but thanks to you I got it working.
Thanks a bunch!
1996 stock stalker- Posts : 40
Join date : 2013-07-18
Re: Openbve Central Line demo
Plus it is my first time understanding how the ATO system works in OpenBVE lol always drive manual so that is why it was even more confusing aha. But a good route for my first ATO run1996 stock stalker wrote:Not a problem if anyone else wants a hand getting it started im online all night tonight. i know how frustrating it is i didn't get mine working first time.RizGE777 wrote:Thank You 1996 Stock Stalker for your clear instructions, it now works perfectly. I must have been doing the procedures but in the wrong mode but thanks to you I got it working.
Thanks a bunch!
RizGE777- Posts : 12
Join date : 2014-03-16
Re: Openbve Central Line demo
Same its my first bve ato
1996 stock stalker- Posts : 40
Join date : 2013-07-18
Re: Openbve Central Line demo
i have to say you rely have brought London underground bve back to life!!! well done. Personally iv always wanted a full Jub Jub for bve but i cant program for my life so it looks like that wont happen any time soon.
1996 stock stalker- Posts : 40
Join date : 2013-07-18
Re: Openbve Central Line demo
Downloading it now but it will at least take me an hour to download all the objects
sstockfan- Posts : 37
Join date : 2011-08-13
Age : 26
Location : Dar es Salaam
Re: Openbve Central Line demo
shouldn't take that long!!!!! i got every thing in about 5 minsstockfan wrote:Downloading it now but it will at least take me an hour to download all the objects
1996 stock stalker- Posts : 40
Join date : 2013-07-18
Re: Openbve Central Line demo
Hello there.
I have tried everything to get this route working but have failed. Please could someone send the route to me? I will PM you my email address
I have tried everything to get this route working but have failed. Please could someone send the route to me? I will PM you my email address
cheesedude432- Posts : 30
Join date : 2014-01-26
Page 3 of 6 • 1, 2, 3, 4, 5, 6
Similar topics
» Openbve Central Line demo Technical problems and or route questions
» In the interest of the Central Line Demo
» Openbve Central line plugin issues
» The new version of the Central line Full Demo
» Central Line Full Demo Release
» In the interest of the Central Line Demo
» Openbve Central line plugin issues
» The new version of the Central line Full Demo
» Central Line Full Demo Release
Page 3 of 6
Permissions in this forum:
You cannot reply to topics in this forum
|
|