Jubilee Line Demo discussion

Page 2 of 2 Previous  1, 2

Go down

Re: Jubilee Line Demo discussion

Post by undergroundernie on Tue Jan 09, 2018 11:44 am

Hi there, I still can't get this to work  Crying or Very sad please can anyone tell me who has got it to work what directory's they have put the files into, I have put the files into C:\openbve\railway and C:\openbve\train

undergroundernie

Posts : 4
Join date : 2018-01-05
Age : 44
Location : London, England

Back to top Go down

Re: Jubilee Line Demo discussion

Post by Dexter on Tue Jan 09, 2018 2:57 pm

I strongly suggest checking the provided manual, everything is in there... Smile
avatar
Dexter

Posts : 1883
Join date : 2011-07-08
Age : 32
Location : Brno, Czech republic

http://www.brnobve.eu

Back to top Go down

Re: Jubilee Line Demo discussion

Post by Ad1992 on Wed Jan 10, 2018 11:23 am

If moderators could please delete any technical questions on this thread and lock it, I would appreciate that.
Any troubleshooting should be asked in the technical questions forum.
avatar
Ad1992

Posts : 297
Join date : 2012-06-04

http://bvewr.webs.com/

Back to top Go down

Jubilee Line Demo discussion

Post by undergroundernie on Wed Jan 10, 2018 11:41 am

Dexter wrote:I strongly suggest checking the provided manual, everything is in there... Smile
I tried looking through the manual and its as much good as a chocolate teapot


Moderator Edit:
Please curb your attitude, and think about what you say before you post.

You've already been asked once by Dexter, and I'll re-iterate that.
A lot of hard work has gone into this route, and comments like that do not help. If you continue in this vein, we may be forced to take further steps.

Thanks.

undergroundernie

Posts : 4
Join date : 2018-01-05
Age : 44
Location : London, England

Back to top Go down

Re: Jubilee Line Demo discussion

Post by Quork on Wed Jan 10, 2018 9:29 pm

Ad1992 you're absoultely right as per forum regulations, we should've acted earlier, my apologies. Thread's been split. I left the original one open though so you can add posts should you choose to.

Moderative hat: Underground Ernie, it seems your behaviour level/standards are underground as well. You're lucky another moderator intervened before I saw your post, this way you get away easier than I'd have chosen to do. Use this chance wisely.
avatar
Quork

Posts : 1159
Join date : 2012-05-05
Age : 26
Location : Hofheim a.T., Hessen (Hesse), European Union

Back to top Go down

Re: Jubilee Line Demo discussion

Post by Terrence1946 on Sun Apr 15, 2018 12:34 pm

Dexter wrote:I strongly suggest checking the provided manual, everything is in there... Smile
Everything is indeed in there but I still cannot get the simulation to work as per the manual.  Even the layout of the cab on my simulation bears no resemblance to that shown in the manual!  I use the 'delete' key, press page down and nothing happens as per the manual.  I know I'm a newbie at this but I'm totally confused by the manual instructions.  Everybody has been very helpful in sorting out problems I had with the 'Central Line' simulation which is now working a treat but now I need help with this if anybody is willing.  Thanks in advance.  I have attached a screenshot of the cab layout of my current 'jubilee' simulation.

Terry.


Terrence1946

Posts : 62
Join date : 2018-04-01

Back to top Go down

Re: Jubilee Line Demo discussion

Post by Tube Check on Sun Apr 15, 2018 6:50 pm

Terrence1946 wrote:
Dexter wrote:I strongly suggest checking the provided manual, everything is in there... Smile
Everything is indeed in there but I still cannot get the simulation to work as per the manual.  Even the layout of the cab on my simulation bears no resemblance to that shown in the manual!  I use the 'delete' key, press page down and nothing happens as per the manual.  I know I'm a newbie at this but I'm totally confused by the manual instructions.  Everybody has been very helpful in sorting out problems I had with the 'Central Line' simulation which is now working a treat but now I need help with this if anybody is willing.  Thanks in advance.  I have attached a screenshot of the cab layout of my current 'jubilee' simulation.

Terry.

When you click on 'delete' key you should hear a sound, after that click on 'page down' then click on your left arrow to go the other side of the cab, from there you should see the menu and the login system

Tube Check

Posts : 8
Join date : 2018-01-26

Back to top Go down

Re: Jubilee Line Demo discussion

Post by Terrence1946 on Mon Apr 16, 2018 3:06 am

Many thanks for this.  I realise now that I should have panned to the right of the cab layout and then I would have spotted the controls for setting up the simulation.

Terry.

Terrence1946

Posts : 62
Join date : 2018-04-01

Back to top Go down

Re: Jubilee Line Demo discussion

Post by Sponsored content


Sponsored content


Back to top Go down

Page 2 of 2 Previous  1, 2

Back to top


 
Permissions in this forum:
You cannot reply to topics in this forum